gold trading costs spread comparison

Trading Costs on Gold: A Spread Comparison Framework That Survives Contact With Your Broker

How to build a comparable, honest cost model for XAUUSD — spread, commission, overnight financing — and how to turn it into a break-even win rate you can actually check against your own statements.

By Auriatech Research Desk · · Last updated 2026-11-08 · 3 min read
execution costsspreadrisk managementbroker comparison

Every broker comparison article on the internet ends the same way: a table of spreads, a star rating, a recommendation. That table is close to useless, for one reason — a spread number without a cost model is not a comparison, it is an advertisement.

A spread of $0.20 and a spread of $0.40 are not “twice as expensive” in any meaningful sense until you attach a position size, a holding period, a trade frequency, and a rule for how the position gets closed. Change any one of those and the ranking flips.

This guide builds the comparison framework itself: the unit conversions (gold quotes are a genuine trap), the full cost stack, and the two formulas that turn costs into something you can act on — a break-even win rate and a monthly cost budget.

Nothing here is a performance claim about any broker, and no broker is recommended. The output is a framework you apply to the contract specifications and monthly statements your own broker gives you.

Step one: get the units right before you compare anything

Gold’s quoting conventions differ across platforms, and most online “spread comparisons” silently mix them up. Get these three numbers from your own terminal’s symbol specification, not from a marketing page.

The contract

The standard XAUUSD contract is 100 troy ounces. Some brokers list 10-ounce or 1-ounce mini gold under a nearly identical symbol name, and some list a spot-metal contract alongside the CFD. Read Contract size on your symbol, not the name of the symbol.

The tick

On a two-decimal gold quote (e.g. 2400.35), the tick size is 0.01 and one tick on a standard 100-ounce lot is worth:

Tick value = tick size × contract size = 0.01 × 100 = $1.00 per 1.00 lot

So, on the standard contract:

Lot size Value of a $0.01 move Value of a $1.00 move Notional value at $2,400
1.00 $1.00 $100 $240,000
0.10 $0.10 $10 $24,000
0.01 $0.01 $1 $2,400

The pip trap

Here is where most published comparisons go wrong. Two conventions are in circulation:

  • Some platforms define 1 gold pip = 0.10 of price → $10 per standard lot.
  • Others call the 0.01 move a “pip” → $1 per standard lot.

They describe the same price move at different scales. If you copy a pip value from one platform into a spreadsheet built for another, every cost in your model is off by a factor of ten — and it will still look plausible.

Rule: convert everything to dollars per round trip before comparing. Never compare “pips”.

The master conversion, for a round trip on lots lots:

Round-trip spread cost ($) = spread_in_price × contract_size × lots

Verified against the standard contract: 0.30 × 100 × 0.01 lots = $0.30. On 1.00 lot: 0.30 × 100 × 1.00 = $30.00.

Why this matters more on gold than on EUR/USD

EUR/USD’s structure (100,000 units, ~$1.10 price) makes a $110,000 notional. Gold at 100 oz and $2,400 makes a $240,000 notional — a little over twice as large for a comparable “one point” of movement. This is why the same percentage spread expressed in points costs far more money on gold, and why a “0.30 spread” that sounds negligible is a genuinely material number on a multi-lot gold position.

Step two: build the full cost stack, not just the spread

The spread is the number everyone quotes. It is also, for a retail trader, the part of the cost stack that is hardest to avoid — you pay it whether or not you make money.

The four components

1. Spread. Already covered. Paid on entry and exit, embedded in the fill price. On a CFD or retail forex dealer, this is a markup on the price you trade against. Regulation NN (12 CFR Part 240) in the US requires retail forex dealers to disclose the amount of any fee, charge, spread or commission imposed on the account — which is why a US-facing dealer statement should itemise it rather than lumping it into a single “commission” line.

2. Commission. A per-side or per-round-turn charge. Many brokers market “commission-free” accounts. The SEC’s forex investor bulletin is explicit about what that label means:

“When a dealer advertises a transaction as ‘commission-free,’ you should not assume that the transaction will be executed without cost to you. Instead, the dealer’s commission may be built into a wider bid-ask spread, and it may not be clear how much of the spread is the dealer’s mark-up.”

So when comparing “commission-free” against a $7-per-lot-round-turn account, the correct comparison is total cost, not the headline spread.

3. Overnight financing (swap / rollover). Charged on the notional value at the daily rollover, with a long and a short rate. ESMA’s Q&A on CFDs lists the applicable charges that must be disclosed: commissions on opening and closing, daily and overnight financing charges, and account management fees or taxes. ESMA’s product intervention analysis notes that leverage magnifies costs — “costs deplete a large share of an investor’s margin.”

For gold this is a large number, not a rounding error. On a 1.00 lot at $2,400 the notional is $240,000. Illustratively: an annualised financing charge quoted in the low single-digit percentage range would run to roughly $5,000–$7,000 per year on that one lot — which dwarfs any spread difference you are shopping for. Actual gold swap rates vary widely by broker and by direction, so read your own schedule rather than assuming a range.

4. Deposits, withdrawals, and currency conversion. Usually small, but non-zero, and frequently the reason an otherwise cheap account is not cheap. If your account is denominated in a currency other than your account’s home currency, every deposit, withdrawal, and conversion carries a fee.

The honest comparison template

Fill this in for each broker you are actually considering. Do not proceed until every cell is sourced from the broker’s own specification page or your own statement.

Field Broker A Broker B Source
Contract size (oz) Symbol specification
Tick size / tick value Symbol specification
Typical spread, off-news (price) Live quote, 3 sessions sampled
Typical spread, around news (price) Live quote, event window
Commission per lot, per side Schedule
Overnight financing, long / short (% annualised) Schedule
Margin rate on XAUUSD Account tier
Minimum stop distance / lot step Symbol specification

Then compute, for your intended usage:

Cost per round trip ($) = spread × contract_size × lots + commission_round_turn
Cost per round trip (%) = cost_per_round_trip / (entry_price × contract_size × lots) × 100

The percentage form is what makes brokers comparable. It says: this round trip costs me 0.0125% of position value — which is directly comparable across accounts, lot sizes, and contract specifications.

(Sanity check on that figure: $0.30 of cost against a $2,400 position value at 0.01 lot is 0.30 / 2400 = 0.0125%. At 1.00 lot, $30 against $240,000 gives the identical percentage — as it must, because the cost and the notional both scale with size. That invariance is the whole point of the percentage form.)

Step three: the two formulas that make this actionable

Formula A — break-even win rate

Let:

  • W = average win in dollars (net of costs, or see note below)
  • L = average loss in dollars (net of costs)
  • C = cost per round trip in dollars
  • p = win rate

If W and L are measured gross (i.e. before costs), then the condition for the strategy to be profitable is:

p·W − (1−p)·L − C > 0

Solving for p:

p > (L + C) / (W + L)

This is the single most useful number in this article, because it converts “my edge is small” into a falsifiable statement: my strategy needs to win more than X% of the time, and my broker’s cost structure adds Y points to that threshold.

Worked example (illustrative, not a backtest result). Take W = $5.00, L = $3.00, and a round-trip cost of C = $0.30 on a 0.01-lot gold position with a $0.30 spread.

Zero-cost threshold:  p > 3.00 / (5.00 + 3.00)        = 37.50%
With the $0.30 cost:  p > (3.00 + 0.30) / (5.00 + 3.00) = 41.25%

The $0.30 spread — which looks like noise against a $5 move — raises the required win rate by 3.75 percentage points. Now repeat it with a $0.60 spread and the threshold is 45.00%. If your strategy’s edge is thin, the spread is your edge, negated.

Note the asymmetry this creates: the cost enters the numerator of the threshold, not the denominator. A fixed dollar cost hurts a small position proportionally more than a large one, but it hurts a low-win-rate strategy proportionally more than a high-win-rate one, because a low win rate means many more round trips per unit of gross profit.

Formula B — the monthly cost budget

The second number to compute is total cost drag, because a per-trade cost becomes a strategy-level problem when it multiplies by frequency.

Monthly cost = round_trips_per_month × cost_per_round_trip
Cost as % of account = monthly_cost / account_balance × 100

Continue the example: 40 round trips per month at $0.30 each = $12.00 per month. On a $5,000 account that is 0.24% of the account per month, or 2.9% per year of pure execution drag, before the position was wrong once.

Now the same 40 round trips on a 0.10-lot position: cost per round trip is $3.00, monthly cost is $120, and on a $5,000 account that is 2.4% per month — 28.8% per year. Same trade, same strategy, same broker. Only the lot size changed, because the spread scales with size and the account did not.

That is the arithmetic that should drive your broker choice and your position sizing together. A cheap account and a small position is a very different proposition from a cheap account and a large one.

Step four: measure spread the way it actually behaves

A “typical spread” quoted in a broker’s marketing page is a number from a quiet moment. Gold’s spread is not constant. It widens:

  • around scheduled events — US CPI, NFP, FOMC decisions;
  • at the daily rollover, when liquidity is thin and financing charges apply;
  • at the London open and around New York, in the sense that the relative size of the spread against your stop distance shrinks — the price is moving further per unit of spread than it was overnight;
  • in thin holiday liquidity.

A defensible sample: record the bid/ask at a fixed cadence across at least three sessions and at least one high-impact event day, then report the median, the worst observed value, and the value at rollover separately. Three numbers, not one.

This is exactly the kind of assumption that has to appear in a backtest report. If the strategy was tested at a fixed 0.30 spread and it trades through the NFP window, the test result is not conservative — it is wrong in a specific, predictable direction. See EA Backtest Traps: Overfitting, Look-Ahead, and Out-of-Sample Testing for how to structure the test around that assumption.

Step five: the questions to ask a broker before depositing

Regulation and consumer-protection bodies point at a consistent set. From the CFTC’s forex customer advisory, the SEC’s investor bulletin, ESMA’s CFD product measures, NFA’s regulatory guide, and the US retail forex disclosure rules, the recurring checklist is:

  1. Is the firm registered, and with which regulator? The CFTC’s point is blunt: “You are trading against the dealer. Unless you are buying forex futures or options on a regulated exchange, you are trading ‘off-exchange,’ or over-the-counter.” In a market where the dealer is your only counterparty, that fact dominates every basis-point decision in this article.
  2. What is the total all-in cost? Not the headline spread — spread, plus commission, plus financing, plus fees. Ask for the schedule.
  3. Is the financing charge disclosed per position, with long and short rates? ESMA requires the applicable financing charges to be disclosed.
  4. What is the margin rate on XAUUSD, and does it change with size? A grid that fits at one tier may not fit at the next.
  5. How are costs itemised on the statement? NFA’s regulatory guide describes the disclosure standard for retail forex dealers: per-trade disclosure of commission and other fees, and — for dealers not using straight-through processing — the mid-point spread cost.
  6. What is the negative balance protection and margin close-out policy? In the EU, ESMA’s CFD measures exist specifically so that a retail loss on a CFD is capped at the amount the investor deposited. Ask what the equivalent protection is where you are.

What this framework will not do

It will not tell you which broker to use, because the answer depends on your size, your holding period, your trade frequency, and your jurisdiction — four inputs that vary more than the spread does.

It will not tell you whether a strategy is profitable. It will tell you the win rate a strategy must clear given the account you are actually trading, which is the only version of that question that can be checked against a statement.

And it will not make a thin edge thick. As the CFTC advisory puts it, your dealer “makes money when you trade more frequently, lose money, or pay fees, spreads, or commissions.” Cost is not a rounding error in a retail account. It is one of the few variables in the whole system that you can actually control before you place a single order.


Educational content only. Not investment advice, and not a recommendation of any broker, account type, or instrument. Past performance is not indicative of future results. Trading forex and CFDs on margin carries substantial risk of loss; you can lose more than your initial deposit on some account types.

Frequently asked questions

What is the full cost stack on gold?

Spread, commission, and swap are the explicit costs. The ones traders usually forget are the spread itself widening at session opens and around news, the slippage between decision and fill, and the financing carried overnight on a leveraged position. A framework built only on the displayed spread understates the real cost of a high-frequency strategy.

How do I convert a gold pip into money?

On most CFD brokers 1.00 lot of XAUUSD is 100 troy ounces, so a 1 pip ($0.01 per ounce) move equals $1.00 per lot. A $1.00 move in price equals $100 per 1.00 lot. Getting these units wrong is the most common reason a backtest looks better than the live account.

What is the round-turn cost and how do I use it?

Round-turn cost is the total cost of opening and closing one position: entry spread plus exit spread plus commission on both sides. Divide it by the dollar value of the target move to get the price distance the trade must cover before it makes any money.

How much of my gross profit does spread actually consume?

For a grid it can be a large share, because the number of transactions scales with the depth of the adverse move. For a low-frequency trend system the same spread is usually a minor deduction. This is why spread assumptions must be varied in testing rather than fixed at one value.

How do I measure the spread my broker actually gives me?

Record the bid-ask spread at several times of day over a full week, including around the daily rollover and around scheduled news events, and look at the distribution rather than a single number. A flat spread assumption overstates the profitability of every session-based strategy.

What should I ask a broker before depositing?

The contract size for XAUUSD, the average and worst-case spread, the commission per lot per side, the swap rate including any markup, the margin requirement and leverage tier for the account type, and how quickly stop orders are executed in fast markets.

Sources

  1. CFTC — Customer Advisory: Eight Things You Should Know Before Trading Forex — accessed 2026-11-08
  2. SEC Investor Bulletin — Forex Trading For Individual Investors — accessed 2026-11-08
  3. ESMA — Product Intervention Analysis (Final Report on CFD product measures) — accessed 2026-11-08
  4. ESMA — Questions and Answers on CFDs and other speculative products — accessed 2026-11-08
  5. NFA — Forex Transactions: Regulatory Guide — accessed 2026-11-08
  6. eCFR — 12 CFR Part 240, Retail Foreign Exchange Transactions (Regulation NN) — accessed 2026-11-08
  7. BIS — Triennial Central Bank Survey of Foreign Exchange and OTC Derivatives Markets, 2022 — accessed 2026-11-08
  8. Admiral Markets — Gold (100 oz) contract specification — accessed 2026-11-08
  9. 9xMarkets — XAUUSD contract size, pip value and margin reference — accessed 2026-11-08
  10. GoldHunts — Gold glossary: tick size and tick value on XAUUSD — accessed 2026-11-08

Use the free tools

Open-source calculators — no signup required.

Use the free tools
Risk disclosure — read before acting on anything above

All content on this site is provided for educational and informational purposes only. Nothing published here constitutes investment advice, a recommendation, or an offer to buy or sell any financial instrument. Trading foreign exchange, CFDs, and precious metals involves a high level of risk and may result in the loss of your entire capital. Past performance of any strategy, robot, or expert advisor (EA) — whether simulated, backtested, or live — is not indicative of future results. You are solely responsible for your trading decisions. If you are unsure whether a strategy is suitable for you, seek independent advice from a licensed financial professional in your jurisdiction.

Educational content only. Not investment advice. Trading forex and CFDs carries substantial risk of loss.